Fascias and soffits
Tired roof edges age a home faster than almost anything else. Fresh fascias and soffits tidy the roofline, protect rafters from the weather and give gutters a solid, straight base — all while lifting kerb appeal in a single, tidy project.
★★★★★4.9 from 278 Google reviews
We supply and fit fascia boards and soffits in tough, low-maintenance uPVC, with colour-matched trims and long guarantees. Whether you need a like-for-like fascia replacement or a full roofline refresh (including guttering and cladding), our fascia and soffit installers work cleanly, safely and to manufacturer standards.
We focus on the details that keep water out and lines looking true: straight runs, solid fixings into sound timber or replacement backing boards, properly vented soffits, and smart junctions at gables and eaves. Done right, your roofline looks intentional from the pavement — and stays that way through years of British weather.
Signs you need fascia replacement
- Wavy or sagging gutters caused by soft, rotten backing timber or warped boards
- Peeling paint or flaking surfaces on old timber runs
- Black staining on brickwork below the eaves from leaks and overflows
- Gaps at the eaves where birds or insects have found their way in
- Damp smells in the loft — often a sign of poor eaves ventilation
If you’re seeing two or more of these, a well-specified fascia replacement with new soffits and vents will usually outlast patch repairs and multiple repainting cycles.
Why homeowners choose uPVC fascias today
- Low maintenance: no sanding, filling or repainting — a quick wipe keeps them sharp.
- Weather resistance: uPVC boards are stable and water-resistant, unlike ageing timber.
- Clean lines: factory-finished faces stay straight and bright for years.
- Colour choices: White, Black, Anthracite and wood-effect foils for a coordinated façade.
- System parts: matching corners, joints, trims and eaves protection trays for a professional finish.
Timber has charm but demands upkeep; uPVC fascias deliver the look without the yearly ladder routine.
Over-capping vs full replacement — which is best?
- Over-capping: fixing thin capping boards over existing timber. It’s only appropriate when the timber beneath is sound, straight and dry.
- Full replacement: removing old boards, checking rafter ends, fitting new treated backing boards where needed, then installing new uPVC fascia boards and soffits.We recommend full replacement in most cases: it solves existing rot, restores fix strength for gutters and extends lifespan. We’ll inspect and explain the right route for your home.
Ventilation matters — soffit vents and eaves protection
A healthy roof needs to breathe. We fit continuous or discreet circular soffit vents to meet ventilation requirements and install eaves protection trays under the felt or membrane so water drips safely into the gutter, not onto the timber. This small detail often prevents the rot that led to replacement in the first place.
Guttering and downpipes — straight, leak-free and colour-matched
New roofline often pairs with fresh guttering:
- Profiles: Half-round, deep-flow or square depending on roof area and style.
- Materials: uPVC in White, Black, Anthracite and Browns to match fascias and soffits.
- Falls and outlets: set precisely so water runs cleanly to downpipes without standing.
- Joints: silicon-free, compression-sealed connectors for long-term, serviceable joints.
Ask about upgrading to deep-flow if your roof sees heavy rain — it helps prevent overflows in storms.
Colour and style options for fascias and soffits
- White for a classic, bright edge that suits most homes
- Black or Anthracite for a modern contrast with pale render or brick
- Wood-effect foils (Golden Oak, Rosewood, Irish Oak) to echo traditional joinery
- Plain or hollow soffit boards — the latter can include integrated vents for a neat look
We colour-match corners, joints and trims so the line reads cleanly from gable to gable.
How we install fascias and soffits — the steps that keep water out
- Survey & options We check the condition of existing timber, rafter ends, felt at the eaves, gutter falls and any tricky junctions. You get an itemised quote for fascia replacement, soffits, vents and optional guttering.
- Safe access We use scaffold or safe access towers — no shaky ladders — and protect paths, drives and planting below the work area.
- Strip and prep Old boards and gutters come down, rafter ends are inspected, and any soft timber is cut back and replaced. We fit treated backing where needed for solid fixings.
- Eaves protection & ventilation We install eaves protection trays under the felt or membrane and set continuous or discreet soffit vents to specification.
- New soffits & fascias Soffit boards go in level, then new fascia boards are fixed at the correct centres. Corners, joins and end caps are finished with colour-matched trims.
- Gutters & downpipes New guttering is run with accurate falls, outlets positioned sensibly, and joints clipped and sealed to manufacturer guidance.
- Tidy & sign-off Waste is removed, access equipment cleared, and we walk the run with you for a final check — straight lines, tight joints, quiet confidence.
Fascias and soffits with complex details — gables, box ends and dormers
Tricky points are where poor jobs show. We:
- Form box ends that actually shed water rather than trap it
- Align gable bargeboards with crisp mitres and colour-matched fixings
- Tie into dormer cladding and side cheeks with neat junctions
- Integrate over conservatories using purpose-made covers and careful sequencing
It’s the difference between “it’ll do” and “that looks built with the house”.
Maintenance — five-minute habits that add years
- Wipe boards with a mild solution once or twice a year
- Clear gutters and downpipe inlets after leaf-fall
- Check joints and corners after storms and re-clip if needed
- Inspect for nesting attempts in spring; intact soffits and vents deter birds
- Keep climbing plants off the roofline — they trap moisture against boards
With these habits, modern uPVC fascias and soffits keep their edge for decades.
More like this
What customers say
Rated 4.9 out of 5 on Google and Trustpilot
Your free quote
Your free quote.
Tell us a little about your home and we will call to talk it through and arrange your free survey.
- Quick and free. Just your name, number and postcode.
- A friendly chat, not a sales pitch. We’ll call to talk through your project and answer your questions, then arrange your free home survey.
- Prefer to ring us? Call free on 0800 233 5576, Monday to Friday 9am to 5pm.
Get your free, no-obligation quote
Leave your name, number and postcode and one of our local team will call you to arrange your free home survey.
★★★★★“Extremely efficient, professional and helpful company.”Sarah Thomas, Google review · 4.9 from 278 reviews
Questions
Your questions, answered
Can you replace fascias and soffits in winter?
Yes — we work year-round. We plan around weather and keep roof edges protected while boards are off.
Do I need new gutters at the same time?
Not always. If your gutters are straight, sound and colour-matched, we can refit them. Many homeowners choose new gutters for a “brand-new” finish and fresh seals.
Will birds still get into the eaves?
Properly fitted soffits with intact vents and trims close typical entry points. We’ll also check for gaps at the roof membrane and box ends.
Are wood-effect foils durable?
Modern foils are UV-stable and bonded for long life. Clean with mild solution only — no abrasives.
What’s better — over-capping or full replacement?
Over-capping works only on perfectly sound timber. Full replacement addresses rot, restores fix strength and usually proves better value over time.
Ready to talk about your home?
Leave your details and one of our local team will call you, or ring us free on 0800 233 5576.
★★★★★4.9 from 278 Google reviews